An adhesion or adhesion promoter in inks is a chemical additive used to improve the bond between the ink and the substrate or surface to which it is applied.
Increases the ink’s ability to adhere or stick to the substrate, ensuring better ink coverage, durability and resistance to rubbing or smearing.
Decomet® is the name of SCHLENK’s range of vacuum metallized pigments (VMP). The manufacturing process makes these pigments extremely fine.
The Green Ramafast range is composed by Phthalocyanine green pigments. This is a synthetic green pigment from the group of phthalocyanine dyes.
Lanco™ Surface Modifiers are specially formulated to improve and protect the appearance of various substrates. They are suitable for use in water-borne, solvent-borne, energy-cured and powder coatings, as well as energy-cured and conventional inks
WAXOLINE®, a registered trademark of Kadion for soluble colorants for the coloring of plastics with high heat fastness. Provides brilliant colors in transparent polymers.
Decomet® 2020 is an ethanol-based metallic pigment (VMP) from SCHLENK. The manufacturing process makes this pigment extremely thin, smooth and highly reflective when applied on films.
One of the main challenges when formulating with organic pigments is to obtain a high color development and intensity, increasing the pigment load to its maximum.
The new wax, LANCO 1390 F, is designed primarily for water-based wood coatings, but can be used on solvent-based or UV-cured wood coatings.
The use of a dispersant specifically designed for high solids content can help, and if the solvent it comes in has been highly refined and reacted with hydrogen to convert aromatics to cycloparaffins.
With Coolmag ™, not only will you get significant heat dissipation in high power electronics, but it also offers the best cost benefit ratio, Coolmag ™ is an ideal system to protect against failures caused by overheating.